NanoWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

==== BNC with Belden Conformable 1673A ====

This is a design to be able to use a Radiall R141007000W BNC cable connector with a RG402/U compliant cable, especially designed for Belden Conformable 1673A.

{{bnc_rg402_adaptor.png|}}

== Assembly instructions ==

  *To assemble this connector you need a 3 pieces of the Radiall R1411007000W BNC connector:
    - the pin
    - the outer shell
    - the nut
  * Strip the last 5 mm of the cable and expose the internal conductor. 
  * Cut 2 mm of the outer braid and leave the insulator. 
  * Solder the pin
  * Put the nut on the cable (you don't want to forget it on the table...)
  * Put the adaptor
  * Put the pin in its place in the outer shell
  * Slide the adaptor in the outer shell; when in position solder the adaptor to the braid
  * Tight the nut