Before operating an apparatus yourself you should have received instructions and you should have done the whole procedure several times yourself while supervised by someone qualified to use the apparatus. These manuals are by no means a 'go flag' to start experimenting on your own!

• ApreoSEM Thermofisher
• ATC 1800F magnetron sputtering system
• Bruker DektakXT profilometer
• Dishwasher cleanroom
• EBPG Raith-100
• Glovebox
• Ion beam etcher
• K-cell evaporator
• Nikon LV150 optical microscope
• Optical lithography KarlSuss MA45 Mask aligner
• Oxide epitaxy sputtering system
• Plasma Cleaner PDF-32G-2
• Plasmalab Reactive Ion Etcher
• Resist recipes
• Spin coater POLOS SPIN150i
• Sputter coater Cressington 208hr
• Tube Oven - H2, Ar and Vacuum Annealing
• Tube Oven - O2 and Ar Annealing
• Resistance evaporator
• UHV magnetron sputtering system
• UHV E-beam evaporator
• Wire bonder
• Z-406 diode sputtering system
• Z-407 automatic diode sputtering system

• AFM room 626, contact mode
• AFM room 626, tapping mode
• AFM room 626, Magnetic Force Microscopy
• AFM, Veeco Software Manual
• Balzer MED-010 magnetron sputtering
• Barrel etcher
• Creating optical masks
• Electron beam lithography old ebpg
• FEI NanoSEM 200
• JEOL 820 SEM
• MPMS helium transfer
• MPMS-XL
• MPMS-5S (SQUID)
• MPMS-5S (SQUID) helium transfer
• Optical lithography
• PPMS
• PPMS helium transfer
• Siemens D5005, reflectometry
• VCN info